| Material: | Metal |
|---|---|
| Layers: | Single |
| Usage: | Liquid Filter, Air Filter |
| Type: | Black Wire Mesh |
| Hole Shape: | Round |
| Structure: | Multilayered |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier mist eliminator system combining a roof and support flat type roof shaped V-shaped vertical gas mist eliminator installed in gas cleaning absorber wet scrubbers
The roof type mist eliminator consists of two layers of herringbone defoggers and three layers of flushing pipes. The first-stage demister is coarse demister, and the second-stage demister is fine demister. Connecting pieces are used between modules and bolts are fastened. There is a square tube support under each module to increase the load-bearing capacity. In the FGD system, there will be droplets in the flue gas after spray cleaning. In order to ensure the safe operation of downstream equipment, these droplets must be removed. Droplet separation is accomplished in a two-stage mist eliminator, with the ridge mist eliminator located on the top of the tower in an integrated design. The flue gas passes through the demister and then upwards into the clean flue gas duct. The first stage of the mist eliminator can remove larger droplets, and the second stage removes the remaining smaller droplets. The mist eliminator needs to be flushed regularly during operation.
The tube enables the demister to remove large mist droplets, which is effective in removing large mist droplets larger than 400-500. It prevents most of the dust and gypsum slurry from directly entering the secondary demister. It is easier for dust and gypsum slurry to stick to the tubular demister. Rinse thoroughly. The rhino-ridge type mist eliminator is not prone to secondary water entrainment, and the flue gas flow rate limit reaches 7.5m/s. This mist eliminator combination is more suitable for desulfurization conditions where the flue gas contains high dust concentration and a large amount of gypsum slurry.
| Demisting efficiency | ≥90~99% |
| pressure drop of the demister body | ≥35pa, ≤150pa (clean state) |
| Critical flow velocity | 3.5m/s~5.0m/s |
| Mist eliminator layout | customerized according to working conditions |
| vane material | FRPP |
| vane type | sinusoidal waveform, sunken sinusoidal hook waveform, symmetrical folded plate type, etc |
| Diffusion angle of demister flushing nozzle | 90°~110° |
| Vertical distance between flushing nozzle and demister section | ≤800mm |
| Flushing method | The first-level demister uses double-sided flushing, and the second-level demister can use single-sided flushing (double-sided flushing can also be used) |
| Flushing coverage | 150%~200% |
| Flushing intensity | customerized according to working conditions |
Hebei Langjing Environmental Protection Technology Equipment Co., Ltd. is a professional manufacturer engaged in the development and production of environmentally friendly products. The company is famous at home and abroad for its strong technical force, strict quality management, excellent product performance, and first-class after-sales service. It has passed the ISO9001 quality management system certification, ranking among Among the top 100 environmental protection enterprises in the country.
The company's main business scope: research, production and sales of various dust removal, desulfurization and environmental protection equipment, tube bundle demisters, PP demisters, stainless steel demisters, fiberglass demisters, filters and various environmental protection equipment accessories.
The company has established long-term and stable collaborative relationships with many domestic scientific research and design universities, and has accumulated rich practical experience in demister desulfurization technology.
In recent years, our company has been adhering to the guiding ideology of "taking investment in science and technology as the guide, ensuring excellent quality, and aiming for cutting-edge products", and has actively "joined forces" with universities and research institutes to integrate scientific research, production, and development.
We have provided products for national-level large-scale engineering projects and has the ability to provide one-stop service capabilities integrating environmental engineering design, manufacturing, installation, commissioning and after-sales.
Main features of our mist eliminator:
The designed defogging area is fully redundant and has high defogging efficiency;
The pressure drop of the defogger body is small.
The scale is compact and the flow area of the mist eliminator section is highly utilized.
The flushing system is scientifically and rationally arranged and can work in places with high dust concentrations without clogging or scaling.
The whole body combination is securely connected, has strong ability to withstand the impact of high-temperature smoke, and is not easily damaged. Modified materials have strong oxidation resistance and long service life.
We have been and will always focus on the research and development of Mist eliminators, high efficiency but easy to install, inspect, maintain and replace!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}